Acoustics Consulting + Studio Design.

Hear your mixes clearly enough to trust your decisions.

If the low end disappears at your desk or your mixes keep coming back from the car with surprises, your room and speaker setup are worth investigating. I’ll help you find out what’s getting in the way, what’s worth changing, and where to put your budget. If you’re planning a retrofit or a new build, we can work through those decisions before you commit to a layout or buy materials.

See a Studio Build

What stage is your room at?

Acoustics Consulting.

For a room you’re already working in. We’ll look at how your monitors and room interact, then prioritize what to test, move, or treat so you know where to start.

Studio Design.

For a retrofit or a new build. We’ll design the layout, monitoring setup, and acoustic treatment together so you can make decisions about the room and where to spend before construction starts.

Studio Design & Build Series

From Spare Bedroom to Mixing and Mastering Studio.

What can a small bedroom become when you let the measurements guide the build? In this free, ten-part Studio Design & Build Series, I take you inside a real bedroom conversion and walk you through the decisions that shaped it.

You’ll see how I chose which wall to face, positioned the monitors and listening seat, and used Room EQ Wizard (REW) to measure the room before building treatment. Then I take you through the bass trapping, broadband panels, and ceiling cloud. In the final episodes, you can compare the before-and-after measurements, see the finished studio, and hear what the client thought, with a breakdown of what the materials cost.

If you’re working on your own room, use the series to figure out what to investigate first and what you can test before spending money on treatment. If you’re considering working with me, it gives you a look at how I weigh tradeoffs and check the results.

New to the build? Start with the trailer. Want to see what changed? Jump to for the measurements or for the finished-room reveal, material costs, and client feedback.

Tell me what’s happening in your room and what you’d like to improve. We can talk through where it makes sense to start.

Acoustic measurements before and after.

I measured the bare room in Room EQ Wizard and measured it again with the acoustic treatment and ceiling cloud installed. Explore the finished room and compare what changed in the frequency response, decay, and early reflections.

Finished studio
Finished studio

The converted bedroom with the ceiling cloud and wall treatment installed.

How a project works.

  1. Send a short inquiry. Tell me what you’re working on and what you’d like to solve.
  2. Discuss the next step by email. We’ll decide whether an initial consultation or a broader design engagement fits your project.
  3. Complete the studio intake. Once we’re underway, I’ll send you a guide to document your room, measurements, and any existing plans.
  4. Turn the findings into a plan. Depending on the scope, we can move from measurements and modeling to treatment design, build guidance, and verification.
Drew at the desk in Control Room A beneath the acoustic ceiling cloud

Selected collaborations.

HEDD Audio + Ex Machina Soundworks.

I partner with both loudspeaker brands to educate engineers about their monitoring technology.

Duvaltex / Guilford of Maine + RME.

Collaborations spanning acoustic fabrics and professional audio interfaces.

iZotope.

Commissioned education for mastering engineers on Ozone 12.

Sonarworks.

Commissioned to create the official SoundID Reference education series.

Tell me about your room.

Tell me what you’re working on and what you’d like to solve. Are you improving an existing room, planning a retrofit, or starting a new build?

Work with Me.